weldable steel tubing
"
Precisie om Lasbaar Staalbuizenstelsel 1 - 200m Lengte voor Condensator GB/T24187
GB/T24187 Cold Drawn Precision Welded Steel Coil Tubes for Condenser Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.5-1.2mm General Length:1-200m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0.0701
40Cr/41Cr4/5140 Koudgetrokken Naadloze Staalbuis, het Automobielbuizenstelsel van het Delen Lasbare Staal
Product Name: 40Cr / 41Cr4 / 5140 Seamless Cold Rolled Steel Tube for Automotive Parts Material: 40Cr / 41Cr4 / 5140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5.
Q195 Mechanisch die Staalbuizenstelsel Erw voor Lage Druk Vloeibare Levering GB/T3091 wordt gelast
GB/T3091 Q195 ERW Welded Steel Pipes For Low Pressure Liquid Delivery Welded Steel Pipes Weled steel pipes for low pressure liquid delivery is also called general welded pipe, commonly known as the clarinet. It is used to transport oil, gas, air, water and heating steam and other general low pressure fluid and other purposes of welded steel pipe.Steel tube is divided into ordinary steel pipe and increasing pipe according towall thickness ;According to side form,it is divided
6 - 168mm OD verlichtte het Lasbare Staalbuizenstelsel, Spanning de Ontharde Dikke Buis van het Muurstaal
Product Name: Carbon Steel Welded Tube Type 5 DOM Tube ASTM A513 / ASME SA513 Stress Relieved Annealed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel
De elektrische Pijp van het Weerstands Lasbare Staal, SA178-de Gelaste Pijp van het RangKoolstofstaal
Product Name: SA178 Grade A C D Electric Resistance Welded Carbon Steel Pipe Boiler and Superheater Tubes Size Range: OD: 12.7-127mm, WT: 0.9-9.1mm, Length: 5.8m/6m, maximal 11.8m Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and Safe ends Heat treatment: After welding, all tubes are heat treated at a temperature of 1650℉ (900℃) or higher and followed by cooling in air or in the cooling chamber of a controlled atmosphere
Koudgetrokken Gelaste Buizen van Schokbreker de Precisie Gelaste Pijpen CDW met Vlotte Binnenoppervlakte
Product Name: 32mm × 1mm Shock Absorber Precision Welded Pipes CDW Cold Drawn Welded Tubes with Smooth Inner Surface 1. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 2. Stable Quality with Comeptitive Price 3. Good Extending and Bending Ability EN10305-2 Welded Precision Steel Tubes, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is
Gelaste het Staalpijp van DIN 2393 Precisie
1. Product Name: DIN2393 Precision Welded Cold Drawn Steel Tube for Automobile Industry 2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Good Extending and Bending Ability Product Name DIN2393 Precision Welded Cold Drawn Steel Tube Material RSt34-2, RSt37-2, St44-2, St52-3 Delivery Condition BK, BKW, BKS, GBK, NBK Standard DIN2393 Size Range OD: 6-88mm, WT: 1-10mm Application High precision purpose, auto parts,
Q195 walste Gelaste Staalpijp voor de Machinesindustrie 6 koud - 88mm OD Grootte
1. Product Name: Q195 Cold Rolled Welded Steel Tube Cold Worked for Machinery Purpose2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m3. Stable Quality with Comeptitive Price4. Good Extending and Bending Ability Product NameQ195 Cold Rolled Welded Cold Worked Steel TubeMaterialQ195, Q235Delivery ConditionBK, BKW, BKS, GBK, NBKStandardDIN2393 / ASTM A513Size RangeOD: 6-88mm, WT: 1-10mmApplicationHigh precision purpose, auto parts, oil cylinder, etcRound
De ronde Precisie laste de Grote Diameter van de Staalpijp voor Autodelen/Olie Cilinder
1. Product Name: DIN2393 Welded Cold Drawn Precision Steel Tube for Precision Application 2. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Good Extending and Bending Ability Product Name DIN2393 Welded Cold Drawn Precision Steel Tube Material RSt34-2, RSt37-2, St44-2, St52-3 Delivery Condition BK, BKW, BKS, GBK, NBK Standard DIN2393 Size Range OD: 6-100mm, WT: 1-10mm Application High precision purpose, auto
