cold drawn seamless pipe
"
Hoge Hardheid om Staalbuizenstelsel, EN31/SUJ2 Koudgewalste Naadloze Buis
ASTM A295 SAE52100 100Cr6 GCr15 EN31 SUJ2 seamless bearing Steel tubes 52100 Bearing Steel Tube: Process: Hot rolled: Steel bar+ Heating+Piercing+Hot rolled+ Cut+ Spheroidize annealed(optional)+Inspection+Package. Cold finished: As shown in the figure below. Size range: Outer diameter: Cold finished: 12-219 mm, Hot Rolled: 51mm-530mm Wall thickness: Cold finished: 1-40mm, Hot Rolled: 5mm-120mm Length: Not more than 12 m. AISI 52100 Chemical Composition The following table
Van de de Boilerlegering van JIS G3462 STBA12 het Staalnaadloze buizen
JIS G3462 STBA12 Alloy Boiler Steel Tubes STBA12, STBA13, STBA20 etc. Size Range: OD: 3.2-76.2mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m Stable Quality with Comeptitive Price High Preformance and Longer Working Life Applications: This standard tubes are used for exchanging heat between the inside and outside of the tubes, such as water tubes, smoke tubes, superheater tubes of boilers, and heat exchanger tubes, condenser tubes and catalyst tubes used in chemical and
En10297-1 de koude Misvormde Naadloze buizen 42CrMo4 van het Legeringsstaal
EN10297-1 Seamless Cold-Deformed Steel Pipes 42CrMo4 Mechanical Alloy Steel Seamless Tubes 42CrMo4/AISI4140 EN10297-1 Seamless cold-deformed steel pipes 42CrMo4/42CrMo4 hollow steel bars General for 42CrMo4 hollow steel 42CrMo4 is a steel for quenching and tempering, which has a good combination of strength and toughness in the quenched and tempered condition. After oil quenching it will be through hardened up toØ60 mm bar diameter. The micro structure of bigger dimensions is
1 - 15mm Buis van het GEWICHTS de Naadloze Koudgetrokken Staal, Naadloze Zwarte Staalpijp voor Leidingstoestel
Product Name: EN10305-1 E235 E255 E355 Cold Drawn Precision Seamless Steel Tube Material: E235, E255, E355 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: +C, +LC, +SR, +A, +N Application: For high precision purpose, auto industry, like manipulator, Shock Absorber, Transmission Shaft, Steering Gear, Car Frame, etc. Stable Quality with Comeptitive Price. +N(Bright Annealing) Heat Treatment, Surface is bright and smooth, without oxide
Het duurzame Naadloze Koudgetrokken Buizenstelsel van het de Rondestaal van de Staalbuis 1 - 20mm GEWICHTSgrootte
GOST8734/GOST8733 Seamless cold deformed Steel Tube by size 25x2mm 25x2.5mm 20x2mm 20x2.5mm Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 12meters This standard is applied to seamless cold and warm deformed steel pipes of general purpose of carbon and alloy steel. Pipes are to produce in accordance with requirements of present standard conforming with technological process in accordance with
DIN 1630 Naadloze Koudgetrokken Staalbuis St37.4/de Materiële Ronde Vorm van St44.4/van St52.4
1. Product Name: DIN1630 St37.4 St44.4 St52.4 Seamless Cold Drawn Steel Tube , Round Carbon Circular Steel Tube 2. Size Range: OD: 6-154mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Performance and Longer Working Life Steel Pipe 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product Name DIN1630 Seamless Cold Drawn Structural Steel Pipe Material St37.4, St44.4,
De lage Buis van het Koolstof Naadloze Koudgetrokken Staal voor het Model van de Warmtewisselaarcondensator ASTM A179
1. Product Name: ASTM A179 Low Carbon Steel Cod Drawn Seamless Steel Pipe Heat Exchanger Condenser 2. Size Range: OD: 3.2-76.2mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. High Preformance and Longer Working Life Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat
NBK Bright Annealed naadloze koudgetrokken stalen buis
Product Name: NBK Bright Annealed Seamless High Precision Cold Drawn Steel Tube DIN2391 Material: ST35, ST45, ST52 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: BK, BKW, BKS, GBK, NBK Application: For high precision purpose, auto industry, like manipulator, Shock Absorber, Transmission Shaft, Steering Gear, Car Frame, etc. Cold Drawn on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance NBK(Bright Annealing)
Hydraulische SMLS walste Naadloze Buis, Pneumatische het Staalbuizen van Erw van Machtssystemen koud
1. Product Name: SMLS Seamless Cold Drawn Steel Tubes used for Hydraulic and Pneumatic Power Systems EN10305-4 E235 +N 2. Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. +N(Normalized) Heat Treatment, Surface is clean and smooth, without oxide scale 5. Good Extending and Bending Ability. Product Name EN10305-4 Seamless Cold Drawn Steel Tube Material E235, E255, E355 Delivery Condition +N (Normalized) Standard
